The Silent Killer

Smoke inhalation is the primary cause of death for victims of indoor fires. Smoke inhalation injury refers to injury due to inhalation or exposure to hot gaseous products of combustion. This can cause serious respiratory complications.

130 people died because of this cause, accounting for 34% of all fatalities. A further 74 (19%) fatalities were attributed jointly to both burns and being overcome by gas or smoke.

Stopping the movement of smoke and heat

Building codes have identified the need for effective escape routes as well as fire and smoke compartments in order to prevent the movement of smoke and heat. However, the architectural trend is for buildings with large open spaces, hence no compartmentation.

Fire and smoke curtains can provide a solution. They can be perfectly integrated into the building’s design so that they are virtually invisible when rolled up. They can also be connected to fire detection systems that will trigger them so that, in the case of a fire, they roll down creating compartments to prevent the movement of fire, heat and smoke.

The importance of fire compartments

Creating compartments also helps ventilators extract the smoke efficiently. Hot smoke is more buoyant and tends to go up, so that natural ventilators will find it easier to extract it quickly. If the smoke is allowed to cool by moving around the building, it will tend to return to ground level.

Fire compartmentation is an important element of ‘passive fire protection’ and is achieved by dividing the premises into ‘fire compartments’ through the use of fire doors, floors and walls of fire-resisting construction, cavity barriers within roof voids and fire stopping to services that penetrate through these dividing elements.

Providing compartmentation to current Building Regulation and British Standards requirements:

• Prevents the spread of fire, smoke and toxic gases
• Subdivides buildings into manageable areas of risk
• Provides adequate means of escape enabling time for the occupants to safely evacuate the premises.

Important issues to identify

• Where an escape route needs to be separated from the rest of the premises by fire-resisting construction e.g. a dead-end corridor or protected stairway the following compartmentation should be ensured:
• Doors (including hatches to cupboards, ducts and vertical shafts linking floors), walls, floors and ceilings protecting escape routes should be capable of resisting the passage of smoke and fire for long enough to enable people to escape the building.
• Where suspended or false ceilings are provided, the fire resistance should extend up to the floor slab level above.
• Cavity barriers, fire stopping and dampers in ducts should be appropriately installed.

Occupiers, specifiers and architects need to be aware that the products they select must be an integral part of a system. When an individual specifies or purchases a system he or she must ensure that the manufacturer has supplied the relevant certification and test data; the specified products then need to be installed in accordance with the manufacturers’ guidelines, mixing and matching the products will cause data to become invalid.

Fire compartmentation should be included as a significant consideration of your existing fire risk assessment and is an area where competency is critical. If these are not adequately considered, this gives rise to a potential failing of the fire risk assessment and far worse than that, could mean that a fire is allowed to spread.

If you would like to know more – or would like to arrange an appointment with one of our senior fire safety advisers – drop us a line.